Aarons kitchen cabinet hardware offers an exciting selection of kitchen cabinet hardware. We have a large inventory of decorative hardware as well as surface and functional hardware

AMEROCK    concealed hinges

E Z Set, no screws, hinge has expandable type dowels. (see below)

Using European hinges (concealed hinges) can be very confusing . This is why a lot of people stay away from them. These are  very simple and straight forward,  making it possible to use these fine hinges effectively, therefore making your job very professional looking.

NO SCREWS TO INSTALL HINGE TO DOOR ( see below ). HINGE CLIPS TO PLATE, NO TOOLS.

To purchase and see more, visit our  New Hardware Site

	Back of door should be drilled with 2-8mm and 1-35mm hole to receive hinge.( Blum Pattern) If purchasing doors from Randy Howse Custom Doors we can drill for you.
	Simply lay door face down on a flat surface, line up dowels on hinge with holes in door, and DROP  hinge into holes.  Remember, these are not the press in dowels.
	With proper screw driver turn screws approximately 1/4 turn all the way to the stop. Hinge is installed. Simply reverse procedure to remove. We suggest hanging all your doors first before finishing. Then you can UNCLIP the hinges from the plate, and even remove the hinge from the door for finishing.
	Install Plates on hinges. Start at end with mounting holes.

	Rock hinge towards clip and Push.
	On the plate are little tabs, these will sit on the front edge of the frame or gable. Your distance back is now automatically set. Just move door up or down by whatever method you use ( a strip of wood clamped to bottom of cabinet) and screw in place. Be sure to put screw in center of elongated hole so it can be adjusted later. (screws not included)
	6 way adjustable: 1. Moves door away from or closer to frame. 2. Moves door left or right. 3. Moves door up and down.
	To remove door from your finished installation, simple hold door and push in on tab at end of hinge.

The methods and parts used in above description will work in 99% of all applications. HOWEVER......

On a lazy susan or if you are using pull outs, these hinges will not swing the door open far enough. You will need to use 170 degree opening hinges.
If you have a corner cabinet at 45 degrees and didn't build your box to use standard hinges, you may need a 45 degree hinge. This hinge when closed sits at 45 degree, not 90 degree like other hinges.